But I must explain to you how all this mistaken idea of denouncing pleasure and praising pain was born and I will give you a complete account of the system, andexpound the actual teachings of the great consequences.
Battery foils are mainly used as current collectors in the positive and negative electrodes of lithium batteries and sodium batteries, which have an important impact on battery performance. The internal resistance of lithium-ion batteries directly affects the battery The reliability and cycle life of the battery depends not only on the four main materials of the battery, but also on the current collector. The current collector is not only the carrier of active substances, but also the The generated current is collected by the conductor, which can form a larger current and improve the charging and discharging efficiency of the lithium battery. According to the actual survey data, each GWh ternary battery requires electricity The pool foil is 300-450 tons, and each GWh lithium iron phosphate battery needs 400-600 tons of battery aluminum foil.
In the field of sodium batteries, since aluminum is less reactive than sodium, sodium ions do not react with aluminum foil at the negative electrode, and aluminum foil is used as a current collector for both positive and negative electrodes. Due to the negative set The demand of aluminum foil for fluid is higher than that of positive electrode. It is estimated that each Gwh sodium battery requires 700-1000 tons of aluminum foil, which is more than twice that of lithium battery.
Long time operation in high temperature or low-temperature environment
The battery is connected to high-load peripherals, and the plugging is not standardized.
Excessive charging and discharging (the remaining power of the battery is less than 3%). The circuits are protected, but it happens occasionally.
Incomplete charging and discharging (not to recharge after using up, but to use and recharge if you want)
Long-term use of the battery in strong electromagnetic radiation (will interfere with the conductivity of the metal in the battery)
Long-term use of batteries in humid conditions (wet batteries will reduce performance)
For Windows 8 and above, you can enter powercfg /BatteryReport in the command prompt to view battery usage and consumption, or you can use hardware detection software (such as Everest) to see, and sometimes false alarms.
Lithium ion battery refers to a secondary battery composed of two compounds that can reversibly insert and extract lithium ions as the positive and negative electrodes. People call this kind of lithium ion battery with a unique mechanism that relies on the transfer of lithium ions between the positive and negative electrodes to complete the battery charging and discharging work. “Rocking chair battery”, commonly known as “lithium battery”.
Lithium batteries usually have two appearances: cylindrical and square. The inside of the battery adopts a spiral wound structure, and a very fine and highly permeable polyethylene film separator is used to separate the positive and negative electrodes. The positive electrode includes a current collector composed of lithium cobalt oxide (or lithium nickel cobalt manganate, lithium manganate, lithium iron phosphate, etc.) and aluminum foil. The negative electrode is composed of a current collector composed of graphitized carbon material and copper foil. The battery is filled with an organic electrolyte solution. In addition, a safety valve and PTC components (partial cylindrical use) are also installed to protect the battery from damage when the battery is abnormal and the output is short-circuited.
The voltage of a single-cell lithium battery is 3.7V (3.2V for lithium iron phosphate anode), and the battery capacity cannot be infinite. Therefore, single-cell lithium batteries are often processed in series and parallel to meet the requirements of different occasions.