How big is the battery foil market demand?

Battery foils are mainly used as current collectors in the positive and negative electrodes of lithium batteries and sodium batteries, which have an important impact on battery performance. The internal resistance of lithium-ion batteries directly affects the battery
The reliability and cycle life of the battery depends not only on the four main materials of the battery, but also on the current collector. The current collector is not only the carrier of active substances, but also the
The generated current is collected by the conductor, which can form a larger current and improve the charging and discharging efficiency of the lithium battery. According to the actual survey data, each GWh ternary battery requires electricity
The pool foil is 300-450 tons, and each GWh lithium iron phosphate battery needs 400-600 tons of battery aluminum foil.


In the field of sodium batteries, since aluminum is less reactive than sodium, sodium ions do not react with aluminum foil at the negative electrode, and aluminum foil is used as a current collector for both positive and negative electrodes. Due to the negative set
The demand of aluminum foil for fluid is higher than that of positive electrode. It is estimated that each Gwh sodium battery requires 700-1000 tons of aluminum foil, which is more than twice that of lithium battery.

8 reasons for the loss of laptop batteries

  1. The battery itself is of poor quality
  2. Use low-quality chargers
  3. Long time operation in high temperature or low-temperature environment
  4. The battery is connected to high-load peripherals, and the plugging is not standardized.
  5. Excessive charging and discharging (the remaining power of the battery is less than 3%). The circuits are protected, but it happens occasionally.
  6. Incomplete charging and discharging (not to recharge after using up, but to use and recharge if you want)
  7. Long-term use of the battery in strong electromagnetic radiation (will interfere with the conductivity of the metal in the battery)
  8. Long-term use of batteries in humid conditions (wet batteries will reduce performance)

For Windows 8 and above, you can enter powercfg /BatteryReport in the command prompt to view battery usage and consumption, or you can use hardware detection software (such as Everest) to see, and sometimes false alarms.

The structure and working principle of lithium ion battery

Lithium ion battery refers to a secondary battery composed of two compounds that can reversibly insert and extract lithium ions as the positive and negative electrodes. People call this kind of lithium ion battery with a unique mechanism that relies on the transfer of lithium ions between the positive and negative electrodes to complete the battery charging and discharging work.
“Rocking chair battery”, commonly known as “lithium battery”.

Lithium batteries usually have two appearances: cylindrical and square. The inside of the battery adopts a spiral wound structure, and a very fine and highly permeable polyethylene film separator is used to separate the positive and negative electrodes. The positive electrode includes a current collector composed of lithium cobalt oxide (or lithium nickel cobalt manganate, lithium manganate, lithium iron phosphate, etc.) and aluminum foil. The negative electrode is composed of a current collector composed of graphitized carbon material and copper foil. The battery is filled with an organic electrolyte solution. In addition, a safety valve and PTC components (partial cylindrical use) are also installed to protect the battery from damage when the battery is abnormal and the output is short-circuited.

The voltage of a single-cell lithium battery is 3.7V (3.2V for lithium iron phosphate anode), and the battery capacity cannot be infinite. Therefore, single-cell lithium batteries are often processed in series and parallel to meet the requirements of different occasions.

The internal structure of laptop battery and battery DIY

Notebook computer batteries are generally composed of casing, battery pack, charge and discharge control and protection circuits (to prevent overcharging and overdischarging).

Let me talk about the battery pack, which is the core component of the laptop battery. Generally, laptop battery cell use 10.8V or 11.1V, and a single battery cannot meet the requirements. Therefore, laptop batteries are battery packs composed of multiple single cells in series and parallel (as shown in the figure, two groups of 3 are connected in series and connected in parallel. Battery pack). As for the 3300mAh, 4400mAh, etc. that you often see in the battery shell, it refers to the battery capacity. It indicates that the current can be used for one hour when discharging the battery. For example: a 4400mAh lithium battery can be discharged at a current of 4400mA for one hour . So the larger the value, the better proof that it can work for longer.

Huaqiangbei Battery Trade Center 5G exhibition activities.

“5G + Smart City”, national standards are implemented in Futian, promoting smart manufacturing

Futian District Deputy District Governor Ouyang Huiyu said in his speech that china has achieved a number of major achievements in scientific and technological innovation, and the development of new kinetic energy continues to increase. Especially during this new crown pneumonia epidemic, it fully reflects the important role of science and technology in epidemic prevention and control. He said that Foton not only has a strong innovation atmosphere and numerous innovative resources, but also takes the lead in the forefront of innovation and technology development, and will fully promote new infrastructure, new technology and new manufacturing to take the lead in Futian and create a 5G smart life.

All Ulta Green Battery staff participated in the experience on site, which was very shocking!